Brakes and another cancellation :(

So this week we’ve fixed a leaking master cylinder and I took the car to a garage to get the brakes setup on a brake tester so I could set the bias correctly, found that the rears weren’t actually doing anything and the MS feels like the seals gone, so I’ve taken that off and sent it back for a replacement.

After we did the front brake setup we were about to drive it on the trailer and the clutch cable snapped Unfortunately this was the day before the test day and there was no way I could get it sorted in time to do the test day so I cancelled my entry to the race as I want a test day first. So after deciding the way I connected it is unsuitable, we’ve now welded a bolt into the mechanism and then drilled a hole through the bolt and you can guess the rest, I don’t really like it but it’s the only way we could come up with and it should be secure.